Skip to main content

Shaker Cinder RTA Kitchen Cabinets

Shaker cinder ready to assemble kitchen, laundry and bath cabinets. Laundry cabinets shown with washer & dryer.

Warm Cinder Gray Stained Finish

Overview

    • Limited Lifetime Warranty
    • CARB2 COMPLIANT
    • 3/4" X 1-3/4" Solid Birch Face Frame
    • 1/2" A-Grade Plywood Box Construction
    • Finished Sides Match Door Color
    • 5 Piece Premium Door Solid Birch Stiles & Rails, Birch Veneered Center Panel
    • Natural UV Coated Interior Finish
    • Glass Door Cabinet Interior Matches Door Color
    • Hardwood Dovetail Drawer Box
    • 3/4″ Natural Finish Adjustable Shelves
    • Full Extension, Undermount Soft-Close Drawer Glides
    • Six-Way Adjustable Fully Concealed European Soft Close Door Hinges

Order A Sample

ORDER A SAMPLE DOOR OR SAMPLE CHIP BY CLICKING THE BUTTON BELOW:

If you're local you can call ahead and pick-up your sample.

Specifications

Construction Fronts Hardware

Sides: 1/2" Furniture Grade Plywood. Sides Are Pre-Finished.

Face Frame: 3/4" Thick X 1-3/4" Solid Birch. Dadoed To Receive Sides.

Door Hinges: Concealed European Soft Close 110° Hinges - 6-Way Adjustable.

Back: 1/2" Plywood Full Back.

Door & Drawer Fronts: 5-Piece With Solid Birch Stiles & Rails. Center is birch veneered.

BASE DRAWER GLIDES: Full Extension, Soft Close Undermount Glides Weight Rated To 70 Pounds.

Drawer Box: Dovetail Joinery 5/8" Hardwood Sides, Fully Captured 3/8" Plywood Bottom.

All Door/Drawer Parts Are Fully Sealed Prior To Factory Assembly Of The Door Or Drawer Front.

ROLL OUT TRAY GLIDES: Side Mount Ball Bearing, No Soft Close, Weight Rated To 35 Pounds.

 

CARB2 COMPLIANT

No Center Stile On 24"-36" Cabinets Unless Noted In Product

    • Full-overlay door styles leave roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet, and a cabinet door opening of at least 90° is desired, filler should be installed between the cabinet and the wall (or deeper cabinet). If not, the door may not be able to open a full 90°. For a full opening, a space of at least 1/4"-1/2" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets.
    • The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door thickness.
    • Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4". This can cause a measurement to be off by a fraction of an inch which is within normal industry standards*
    • Schematic images are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. Manufacturers may change construction from time to time with or without notice.

Assembly

Use the convenient bracket system that comes with the cabinet or use power tools with nail, staple & glue. Each cabinet comes with a hardware box that includes all the hardware items needed to assemble your cabinet. Base cabinets that have drawers will also have a box with glides, and screws for installing them. You will need wood glue, power screwdriver, rubber mallet and optional staple gun. Assembly services are available for an added charge and will add 5-7 business days lead time to your order.
Knobs and pulls are not included.

!